How To Install Iron Filter For Well Water

You’re dealing with rusty stains in your sinks and a metallic taste in your drinking water, it might be time to consider an iron filter for your well water. These filters are a game-changer for homeowners looking to remove iron and sediment from their water supply. Installing an iron filter can seem daunting, but with the right guidance, it’s totally manageable. This quick guide will walk you through the basics of filter installation, specifically tailored for well water systems.

How To Install Iron Filter For Well Water? To install an iron filter for well water, first, choose a suitable location near your main water line. Shut off the water supply, and install the filter according to the manufacturer’s instructions. Connect the inlet and outlet pipes, then turn on the water and check for leaks.

Getting started is easier than you might think. First off, you’ll need to choose the right water filter system that meets the needs of your household. The model “filter1/13-65” is a popular choice among many. Once you have your iron filter, the actual installation process involves a few key steps: placing the filter, connecting it to your existing plumbing, and setting up any necessary controls. Whether you’re a DIY enthusiast or this is your first time tackling a project like this, the transcript of the steps provided will help ensure you don’t miss a beat. So, grab your tools, and let’s learn how to install that water filter!

Step-by-Step Guide to Installing an Iron Filter in Your Private Well Water System

Step-by-Step Guide to Installing an Iron Filter in Your Private Well Water System

Installing an iron filter for your private well water system can significantly improve the quality of water in your home. Here’s a step-by-step guide to help you set up a whole house iron filtration system.

We’ll keep the language simple and straightforward, so you can follow along easily, whether you’re a seasoned DIYer or new to home improvement projects.

Choose the Right Iron Filter

The first step is to select an appropriate iron filter for your home. Look for systems designed for well water, like the Pro-OX or air injection models, which are effective at removing iron, manganese, and sulphur odours.

Ensure the filter is rated for the volume of water your household uses and is certified to handle the contaminants specific to your well’s water test results.

Gather Your Tools and Materials

Before you start, make sure you have all necessary tools and materials. You’ll need various fittings to connect the filter to your water system, PEX or PVC piping, a drain nearby to handle backwash, and a few basic plumbing tools like wrenches and pipe cutters.

It’s also a good idea to have some towels and a bucket to catch any water from leaks or spills during installation.

Installation Site Preparation

Choose a location for your iron filter close to where the main water line enters your house and near a drain or a suitable discharge point.

Ensure the site is dry, stable, and accessible for maintenance. It’s essential that the filter is installed before it branches off to your home’s fixtures and appliances to protect the entire house.

Install the Filter

Follow the iron filter installation guide provided with your unit. This typically involves mounting the filter tank, installing the control valve on top of the filter tank, and connecting the water lines.

You’ll want to shut off the main water supply and drain the system before you start cutting any pipes. Use the appropriate fittings to secure the filter to your home’s plumbing. Ensure all connections are tight to avoid leaks.

Connect to the Drain

Iron filters require periodic backwashing to clear out accumulated contaminants. Connect your filter’s drain line to your home’s drainage system.

Make sure the hose is securely attached and that the path to the drain is clear to handle the water flow without backups.

Setup and Calibration

Once your filter is connected, follow the manufacturer’s instructions to set up and calibrate the control valve.

This will typically involve programming regeneration cycles based on your water usage and iron concentration. Calibration ensures your filter operates efficiently and extends the life of the filter media.

Flush the System

Before using the water, open the nearest faucet after the filter system and let the water run until it’s clear. This initial flush removes any debris or sediment from the installation process. Check for any leaks and make sure all systems are functioning as expected.


Installing an NSF certified iron filter is a straightforward solution that can significantly enhance your home water quality and tackle common water problems. By setting up a system with two valves, you can isolate the filter for easy maintenance without disrupting your home water supply. Although this is a doable project for those with basic DIY skills, it’s wise to consult a professional plumber to ensure everything meets local specifications and is safely integrated, especially concerning grounding and electrical safety. This upgrade not only improves the longevity of your plumbing but also revolutionizes your daily water use, promoting a healthier lifestyle for your entire household.

Frequently Asked Question(How To Install Iron Filter For Well Water)

How to filter iron from well water?

To filter iron from well water, you can use a water softener or an iron filter specifically designed for well water. These systems typically employ methods like oxidation, ion exchange, or filtration to remove iron particles from the water, ensuring it’s clean and safe for use.

Where to install iron filter for well water?

Install the iron filter for well water after the pressure tank and before any water treatment systems. This placement ensures efficient removal of iron before it reaches other equipment, preventing damage and ensuring cleaner water throughout the system.

What is the cheapest way to remove iron from well water?

The cheapest way to remove iron from well water is typically through oxidation followed by filtration. This can be achieved using methods such as aeration or chemical oxidation with substances like chlorine or hydrogen peroxide, followed by a sediment filter.

How to put a filter on a well?

To put a filter on a well, you’ll need to select a suitable filter type based on the well’s water quality and your needs. Then, install the filter system according to manufacturer instructions, usually involving placement in the well casing or on the well’s outlet.

Found Interesting? Share with your friends