How To Reset A Samsung Refrigerator Water Filter [2024]

You’ve noticed your Samsung fridge’s water filter light blinking, it’s a heads-up that it’s time to replace that filter. No worries, it’s a pretty straightforward process. Whether you’re a newbie or somewhat of a DIY person, you can tackle this with a little help from a handy YouTube video or the fridge’s manual.

How to reset a samsung refrigerator water filter? Reset a Samsung Refrigerator Water Filter by pressing and holding the water filter reset button on the control panel for about 3 seconds. The indicator light will turn off or change color, signaling the reset is complete. Always refer to the specific model’s manual for precise instructions.

First up, locate the control panel on your Samsung fridge. You’ll find the filter indicator on this panel, letting you know it’s time for a change. To reset this indicator after you’ve replaced the filter, simply press and hold the button indicated for filter reset—usually labeled something like “Ice Type” or “Filter Reset”. Hold it down for about three seconds until the filter indicator light goes off.

How Do You Reset the Water Filter Indicator on a Samsung Fridge?

How Do You Reset the Water Filter Indicator on a Samsung Fridge?

Resetting the water filter indicator on your Samsung fridge is a simple task that ensures you continue to enjoy clean, fresh-tasting water and ice. When you see that red filter light illuminate, it’s your fridge reminding you it’s time to swap out the old water filter for a new one.

First, you’ll need to get your hands on a Samsung genuine replacement filter. These are specifically designed to work with your fridge, ensuring a perfect fit and optimal performance. Avoid off-brand filters as they can lead to issues down the line.

To replace the water filter, locate it inside your Samsung refrigerator—often found in the middle or lower section or sometimes at the base grille.

Remove the old filter by turning it counterclockwise or pulling it straight out, depending on the model of your fridge. Take your new filter, remove any packaging, and install it by inserting and turning it clockwise until it clicks into place.

After installing the new filter, it’s time to reset the filter indicator light. Look for the filter reset button on the control panel, usually located near the water dispenser. Press and hold this button for about 3 seconds. This action should turn off the red filter light and reset the indicator.

If you hear an alarm after changing the filter, it’s just the fridge’s way of telling you the reset isn’t complete. Press and hold the reset button again until the alarm stops. This confirms that the system recognizes the new filter and resets the timer for the next filter change.

Changing the water filter and resetting the indicator are important for maintaining the effectiveness of your fridge’s water filtration system.

It prevents potential clogs and keeps your ice and water tasting and smelling fresh. If you ever get stuck, a quick search for a video tutorial or description on YouTube can be a great help, offering visual guidance and additional tips.

Step-by-Step Guide to Replacing and Resetting Your Samsung Refrigerator’s Water Filter

Step-by-Step Guide to Replacing and Resetting Your Samsung Refrigerator’s Water Filter

Removing the Old Filter

Locate the water filter housing in your refrigerator, which is typically situated in the upper right-hand corner inside the fridge or within the base grille. Turn off the water supply to the refrigerator to prevent any leaks during the change.

Gently turn the old filter counterclockwise—or pull it straight out if it’s a push-to-release model. If you encounter resistance, consult your owner’s manual for specific instructions related to your model to avoid damage.

Installing the New Filter

Take the new Samsung Genuine DA97-17376B filter and remove all packaging. Some filters come with a cap that must be removed before installation. Insert the filter into the housing, pushing it in while you turn it clockwise until it locks.

You should feel it seat securely in place. Once installed, turn the water supply back on and check for any signs of leaking around the filter area.

Flushing the System

After installing the new filter, it’s important to flush out the system. Dispense water for about 5 minutes or until you fill and empty four gallons. This process helps to clear out any air and contaminants from the new filter, ensuring that the water dispensing and ice maker function correctly with clean water.

Resetting the Filter Indicator

To reset the water filter indicator, locate the water filter reset button on your Samsung fridge’s control panel. This is often labeled clearly and found near the water dispenser or in the fridge’s settings menu. Press and hold this button for about 3 seconds.

When done correctly, the filter light will turn off, or change color, indicating that the reset is complete. If your model uses a touchscreen panel, you might have to navigate to the settings or water filter menu to reset the indicator.


In wrapping up, mastering the simple steps to replace and reset your Samsung refrigerator’s water filter is more than just routine maintenance—it’s a key part of home improvement that enhances your everyday living. Knowing the right time to change the filter and responding promptly to the filter alarm ensures your appliance performs optimally, safeguarding the health and enjoyment of your household. Always refer to your user manual to identify the correct model number and follow the specific instructions for your appliance. 

Moreover, regular attention to these details not only maintains the purity of your water but also extends the life of your refrigerator, making it a wise practice for any homeowner. Remember, changing your filter every 6 months, or as needed based on usage, is crucial. 

Frequently Asked Question(How To Reset A Samsung Refrigerator Water Filter)

How do I reset my refrigerator filter light?

To reset your refrigerator filter light, press and hold the reset button (often labeled as “Reset” or “Filter Reset”) for about 5 to 10 seconds. The location and process can vary by model, so consult your refrigerator’s manual for specific instructions.

How do I reset my Samsung refrigerator?

To reset your Samsung refrigerator, locate the reset button or hold the ‘Power Cool’ and ‘Power Freeze’ buttons on the display panel for about 5 seconds. Some models may require pressing the ‘Fridge’ and ‘Freezer’ buttons simultaneously for 10 seconds. Wait a few moments for the refrigerator to reset.

How do I reset my Samsung inverter filter?

To reset the filter indicator on your Samsung inverter, press and hold the “Filter Reset” button for about 3 seconds until you hear a beep sound. The indicator light should turn off, signaling that the filter reset is complete.

How do I reset my Samsung ice maker after changing the filter?

To reset your Samsung ice maker after changing the filter, locate the reset button on the ice maker, typically found on the front or side. Press and hold this button for about 5-10 seconds until you hear a chime, indicating the reset is complete.

Found Interesting? Share with your friends